Front Parking Sensor + Fog Light Conversion Loom for Range Rover Sport 2010

Parking Sensor ( PDC ) + Fog Light Conversion Loom (Loom Only) for Range Rover Sport 2005 to 2010 Front Bumper This is the loom you need if you want to fit a 2010 front bumper ( all types ) to a Range Rover Sport made from 2005 to 2010 The front parking sensors on the later models are smaller and have a different rear connector so you cant use the original loom. This loom also has the wiring for fitting the front fog lights as well ( HSE models had the fog lights and SE did not have front fogs ) You basically have 2 choices if you want to change the front bumper to 2010 spec on your Range Rover Sport Option 1 – keep your original sensors and wiring and mutilate your bumper to take the early sensors Option 2 – buy this loom and the late type sensors and do the job properly ( but more expensive ) This loom includes the main connectors that plug into the 2005 main car loom and then the wiring to the 4 PDC sensors and the connectors for the left and right fog lamps. You will also need to buy 4 x new parking sensors if you are doing this upgrade – see our other items for a kit that has the loom and the 4 connectors. Fitting Guidance See below video showing how to remove and refit rear bumper. The main connector for the parking loom is behind the left hand rear light. Range Rover Sport 2005 to 2010 conversion front end wiring upgrade – YouTube Video will open in a new window [isdntekvideo] Which Vehicles will this fit ? This loom WILL fit a 2005 – 2009 Range Rover sport fitted with a 2010 front bumper with fog lights including the 2010 Autobiography front bumper.